4) On older models, grasp the bottom portion of the agitator and pull the
entire ass’y off.
(Recent models allow just the top portion’s removal to access these ‘dogs’)
5) Older models – place the agitator on the floor, and, standing
carefully on the bottom portion, pull the top half off. Turn it over, and
the dogs will be accessible for replacement.
6) Newer model dogs can be replaced once the ratchet ass’y is removed.
There are several versions currently in use, but most can be replaced
without removing the bottom agitator half. All‘4-dog’versions use
the 285770 kit, regardless of the cam ass’y style. (Older agitators,
rarely seen now, used a pair of 2 larger dogs, which are a different part
number)
7) On older versions, be careful to align the two tabs when inserting the
upper ass’y back onto the agitator bottom half. When these are aligned,
they will friction-fit the two halves together, making it easier to
reinstall the ass’y. Handle it only by the bottom half to prevent pulling
the top half off when reinstalling.
8) Lightly lubricate the agitator cap’s rubber gasket using a bit of
dishwasher detergent, and push it back into place. (On the Whirlpools with
an inner cap, lube that cap’s o-ring too – makes it easier to snap into
place)
9) Reach around and pat yourself on the back! You just saved at least
$75.00!
