Vintage Sunbeam Mixmaster Carbon Motor
Brushes Set
Brand New!
Used in All Sunbeam Stand Mixers Through
1967, and Some Later 70's Stand Models,
too
|
|
|
Here's a pair of brand new carbon
motor brushes for
the great old Sunbeam Mixmaster mixers,
up through the model 12 (1967), and that
were also used
in most (but not all) of the later 70's models. For
3/16" square brush holders, these
were used in models: K, 1, 3, 5, 7, 9,
10, 11, and 12, and I believe in most of
the other very first models, too, but
I'm missing a few of the very early
mixer motors here to verify that.
These are
very easy to replace in older (pre-68) Mixmasters
with the external Bakelite caps on each side
of their motor. Just keep in mind that
the motor's armature rotates
horizontally, so these should be installed
with their curve matching the
commutator's curved horizontal surface (ie,
you should see the brush's curve when
looking at it from the side when sliding
it into the brush holder). You can
ordinarily re-use the original springs
with these. I have a few used ones left
here if needed, but not very many.
If
you have any questions or need
any other Mixmaster parts, please feel
free to ask me. I keep well over 100
vintage Mixmasters on hand here as parts sources (I also buy
them if you have one to sell!), so I
probably have what you need, at least in
motor parts.
And don't miss the Sunbeam manuals
posted here on the website. They're
direct, high quality scans of the
original manuals my Dad and I have used
for years! Just click on 'Sunbeam' on
the left side of this page to have a
look.
|
|
|
Quantities are always limited on these, and they're
getting hard to find new (mainly because newer small appliances don't
last long enough to wear their brushes out!). So if you
need a set or want to keep spares on hand (a good idea), don't wait!
'Wish I could find better pricing on them; I remember
Dad selling them for a quarter each back in the day (man, does that make
me feel OLD!) A pair of these sell for $12.50 plus $5.50 Priority shipping and
handling (to US addresses only - I ship internationally, but the postage
costs more - just ask), $18.00 total (plus 6% sales tax if you're in PA).
I ship every day but Sunday, so you'll usually see these arrive in 2
days - 3 max, to US addresses.
(You
don't need a Paypal account to securely buy using your credit card)
To email me a question specifically about this part,
or if you're outside the US and need to ask about shipping, please
click
here (I ship many of these to Canada and Australia, but shipping is
higher and takes a bit longer)
|
